Agelkom CAP04-V Manual
5
Connection Diagram:
Only one output are shown. Cap04-V outputs are HIGH when activated. For UP, DOWN, TOUCH,
CABLE FAULT are at 15V and 15mA.
Check your input and configure for ACTIVE HIGH. Your inputs must be 0V level and Pull Up
resistor not used .
If your BREAKOUT BOARD has OPTO COUPLER inputs at 5V level, you can connect directly to
Cap04-V outputs
If your BREAKOUT BOARD has 5V digital level inputs please use voltage divider resistor as
shown below for each inputs.