
OPERATION
ROLLERS
For maximum roller life, the rollers need to touch
each other across the gangs. This adjustment is
made by loosening the u-bolts which attach the
bearing standards. The bearing lock collars must
also be loosened. Bump the standard and the u-bolt
toward the center of the machine until the rollers
touch each other. Retighten the bearing lock collars.
Retighten the u-bolts to at least 150 foot pounds of
torque. Be careful not to put an end thrust or side
load on the bearings.
This adjustment will need to be made twice during
the first 200 acres of operation. After the initial
adjustments have been made, inspect the packer
routinely and adjust rollers when necessary.
SCRAPERS
The scrapers should be centered between the fins of
the rollers to prevent excessive wear. For most field
conditions, the scrapers should be adjusted so there
is 1/8" to 3/16" clearance between the rollers and the
scrapers. There is approximately 1" of vertical
adjustment. As the scrapers wear, it will be
necessary to adjust the scrapers.
It is normal for the scrapers on the rear rollers to
wear unevenly. This is caused by the position of the
scraper in relation to the spring tooth in front of it.
The mulcher should not be used in wet field
conditions or when mud clings to all of the rollers at
one time. The soil will be adversely affected and
scraper life will decrease.
15
C0801L05
C0801L07
Содержание Glencoe ULTRAMULCHER UM43 21'
