SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
48
Normal flame appearance Burner not fitted correctly
MAKE SURE THE FLOW OF COMBUSTION
AND VENTILATION AIR TO THE RANGE IS
UNOBSTRUCTED.
MAKE SURE ALL CONTROLS ARE LEFT IN THE OFF
POSITION.
Customer care
Please complete your details in the inside cover of
this Guide. Then replace this Installation Guide back
in the Customer Care Pack in the correct position.
Please inform the user how to operate the range
and hand over the Customer Care Pack
Thank you.
How to Remove the Range
for Servicing
Follow these procedures to remove appliance for
servicing:
The range is very heavy. Take great care. We
recommend two people maneuver the range.
Ensure that the floor covering is firmly attached,
or removed to prevent it being disturbed when
moving the range around. You will need the
leveling tool.
Pull the drawer out to its furthest point.
Push the ends of the plastic clips – down on
the left-hand side, up on the right-hand side
– to reease the catches holding the drawer to
the side rails. At the same time pull the drawer
forwards and away from the side rails.
For safety’s sake push the drawer runners back
out of the way. Put the drawer somewhere safe.
Retract the two front leveling feet to prevent them
interfering when moving the range.
Slide the range forward to disengage the range
from the anti-tip bracket.
