AGA ECG Standard Скачать руководство пользователя | Manualshive

Страница: 5 / 50

background image

GB & IE

AGA Ellesmere Standard Gas Stove

5

1. General Notes

This AGA Stoves gas appliance is a High Efficiency, Balanced Flue Log Fuel Effect appliance. It
provides radiant and convectional heat using the latest burner technology, as well as having a variable
heat output.

Before Installation, check that the local distribution conditions, nature of the gas and pressure, and
adjustment of the appliance are compatible.

This appliance is intended for use on a gas installation with a governed meter.

This Gas Installation

may only be installed by a registered professional competent person (Gas

Safe installer in the UK)

. The installation must adhere to the requirements of the local and national

Building regulations and national standards. This installation manual must also be followed.

Ensure that the Flue Terminal is not in any way obstructed and is clear of vegetation, i.e. trees, shrubs
etc. and that no objects are leant against the terminal or guard.

Always clean the Window Panel before the fire is ignited. Any finger prints must be removed, as
these will be burnt into the glass and will be un-removable.

Do not operate this appliance if the glass panel has been broken (or cracked), removed or with firebox
access panels open.

Only flue approved by AGA Stoves for this appliance may be used.

This appliance is a balanced flue product and is room sealed and as such requires no additional
ventilation for operation. However an adequate supply of fresh air to maintain temperatures and a
comfortable environment is recommended.

This  appliance  is  designed  as  a  heating  appliance,  and  as  such  will  get  very  hot  in  operation;  all
surfaces  are  considered  to  be  working  surfaces  and  as  such  should  not  be  touched.  The  front  door
window  and  surrounds  are  not  considered  to  be  fully  secure  guards  against  accidental  contact.  It  is
recommended  that  an  approved  fire  screen  be  used  if  children,  the  elderly  or  persons  with  limited
mobility are to be present in the same area.

Do not place curtains, laundry, furniture etc. within a safe distance of 1000mm (HOT ZONE) of this
appliance when in operation

Do not attempt to burn rubbish on this appliance.

Only use the AGA approved and AGA supplied Ceramic Logs and embers

If  this  appliance  is  extinguished  (turned  off),  on  purpose  or  otherwise,  no  attempt  to  relight  should  be
made  within  3  minutes  as  the  thermocouple  inside  the  stove  needs  to  reset  automatically  when  the
firebox heat reduces accordingly

«
...
3
4
5
6
7
...
»

Содержание ECG Standard



















































Отзывы:

Нет отзывов

Похожие инструкции для ECG Standard

Бренд: Yakar Страницы: 28

Бренд: Ecosy+ Страницы: 20

CHARME-KARMA-FEELING

Бренд: EdilKamin Страницы: 134

Бренд: Superior Страницы: 44

Бренд: Harman Home Heating Страницы: 16

Бренд: Yunca Gas Страницы: 4

Бренд: Parkray Страницы: 15

Бренд: HAAS + SOHN Страницы: 20

Бренд: HAAS + SOHN Страницы: 20

Бренд: Harman Stove Company Страницы: 24

Бренд: Harman Stove Company Страницы: 31

Бренд: Hardy Страницы: 67

Бренд: LA NORDICA Страницы: 60

Бренд: Ashley Страницы: 28

Alderlea T5 Classic Insert

Бренд: Pacific energy Страницы: 24

Бренд: Ashley Страницы: 56

Бренд: Vogelzang International Страницы: 56

Бренд: Cadel Страницы: 320

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды