GB & IE
AGA Ellesmere Standard Gas Stove
15
Setting the “Night time Set back” temperature
Default Settings
Night-time setback temperature mode
(Appliance must be in standby mode; pilot ignited)
The room temperature is measured and compared to the night time setback
Temperature. The flame height is then automatically adjusted to achieve the
night time setback Temperature
Timer Mode
(Appliance must be in standby mode; pilot ignited)
The Timers P1 and P2 (Program 1, Program 2) each can be programmed to go
On and OFF at specific times. For instructions see Timer Programming Mode.
NOTE:
The display shows the set temperature every 30 seconds
Setting °C/24 Hour or °F/12 Hour Clock
Press
OFF
and (small flame) button until display changes from Fahrenheit/12
hour clock to Celsius/24 hour clock and vice versa.
Setting the Time
The Time display will flash after either:
(A) installing the battery or
(B) simultaneously pressing the large flame and the small flame buttons
Press the (large flame) button to set the hour
Press the small flame button to set the minute.
Press OFF or simply wait to return to manual mode
Setting the Program Timers
– Default Settings
Program 1:
P1 (SUN LOGO): 6:00 P1 (MOON LOGO): 8:00
Program 2:
P2 (SUN LOGO): 23:50 P2 (MOON LOGO): 23:50
2 x ON times can be programmed
per day - The day starts at 0:00, ends at
23:50.
The ON/OFF times have to be programmed in the order P1
≤ P1 < P2 ≤ P2
If P1 = P1 or P2 = P2 the timer is deactivated
To have the fire over night, it can be set:
P2 23:50 and P1
0:00