AGA DC3M, Руководство по установке

Страница: 18 / 32

Fig. 11A
DESN 517034
AGA DC3G (Power Flue) Gas Supply Connections
(Approximate Positions)
Fig. 11
DESN 517042
Gas Supply Connections
MODULE GAS SUPPLY CONNECTIONS
The cooker must be installed by connection to rigid
pipework, which should not be less than 9 /
16
” (15mm)
diameter.
Connection is made to the
9
/
16
” (15mm) compression
fitting located just below the hotplate level on the rear left
hand side of the cooker.
a. Mark off appropriate position on wall for gas supply to
cooker. See Fig. 1 or 2 and Fig. 11.
b. Isolate the gas supply and connect pipework as
required up to the position marked.
c. Check for gas tightness after connecting gas supply to
the module.
Gas Connections
18