AGA marvel M24TF, Руководство по эксплуатации

Страница: 19 / 60

19
!
CAUTION
Door panels MUST NOT exceed 50 lbs. Do NOT use glass,
mirrors, granite or similar heavy materials for panels. Pan -
els weighing more than 50 lbs. may cause product damage.
We recommend that the door load (panel and food) NOT
exceed 90 lbs.
-Solid door
Screw-
Door Gasket-
-Door panel
Figure 28
"D"
45
9
⁄
32
"
(115cm)
Figure 27
MODEL "D"
M24TF-WP 22
5
⁄
16
" (56.7cm)
M30TF-WP 28
5
⁄
16
" (71.9cm)
M36TF-WP 34
5
⁄
16
" (87.2cm)
Table D
CUSTOM GRILLE FACIA AND DOOR PANELS
Cut the custom overlay panel to the dimensions shown in
Figure 27 and Table D.
This is also a convenient time to locate and drill the holes
for your handle. Most often the handle is to match that of
the surrounding cabinetry. If your handle attaches from the
back-side of the custom panel, locate the mounting holes
while the panel is attached to the door and cabinet. After
the panel is removed from the door, drill the mounting holes
from the front, to the recommended diameter of the handle
manufacturer. Counter bore the back-side of the panel so
the screw heads do not interfere with the surface of the
door.
Step 2: Size the Overlay Panel
Top freezer
door panel
Bottom
refrigerator
door panel
22
7
⁄
16
"
(57cm)
Remove the bottom door:
5. Remove the 2 #10 screws from the center hinge with a
5/16 wrench or socket and ratchet.
6. Pull the center hinge out of the cabinet and lift the bot-
tom door off the lower hinge.