Product description
– English –
DIT 10
28
Cable glands DIT 10
Cable gland kit 2" x 1½" x 1":
1
Flat gasket NBR
2
Reducer G1½ - Rp1
3
Reducer G2 - G1½
Cable gland 1":
1
Sealing gland
2
Washer Ø 17
3
Gland
4
Screw fitting
Cable gland (PG 9) with hex nut:
3.3
Function
The pressure sensor is located at the lowest point of the tank and
concerts the hydrostatic pressure of the fuel/water into an electrical
signal. The measurement signal is transmitted to the display unit via
the cable. Using this signal, the electronic system of the display unit
calculates the tank contents which can be displayed in litres, cubic
metres, percentage or liquid level. The display mode is selected by
means of the function key F. The two programming keys are used to
enter the tank data.
