Operation
– English –
DIT 10
40
7
Operation
7.1
Switching the product on and off
Press the key F to switch on the display of the display unit. The
display unit automatically switches off approx. 2 ½ minutes after
the last time a key was pressed.
The display shows OFF.
In this mode, the battery is not discharged. By pressing the key F,
you switch on the display unit for another 2 ½ minutes and the level
is indicated.
7.2
Display formats
Keep pressing the key to select one of the four available units
for the level:
Indication of volume in litres.
The arrow at the bottom of the display points to "Litres".
Indication of volume in m³.
The arrow at the bottom of the display points to m³.
Indication of volume in % of total contents.
The arrow at the bottom of the display points to %.
Indication of liquid level in mm.
The arrow at the bottom of the display points to FH.
7.3
Correcting the adjusted tank data
If the measured value exceeds the set tank data (for example, be-
cause the tank data entered are not correct), the display starts to
flash. The display toggles between the displayed value and "----".
Only the current level in mm is displayed permanently. In such a
case, check and correct the tank data you have entered.
Simultaneously press and hold down the keys
for a period
of 3 seconds activate the "Enter Tank Data" mode.
The upper left corner of the display shows
.
You can now check and/or correct the tank data, see chapter 6.1,
page 31.
If you do not want to change any of the tank data, press the key F
four times to return to the normal measuring mode.
is no longer displayed in the top left corner of the display.
