EN 4
AFPUMPS S.r.l.
E-mail: [email protected]
h p:// www.afpumps.com
Tel. +39 0429 77 82 95 - Fax +39 0429 76 30 49
Tab.1
Model
Oil motor quantity
Mechanical seal chamber oil quantity
MIX 75-6
1,0
0,30
MIX 100-4
MIX 150-4
CLEANING
Do not ship the product to the manufacturer if it has been contaminated by any nuclear radia on.
Inform the manufacturer so that appropriate measures can be taken.
Make sure that the machine and all components have been properly cleaned and reclaimed before
sending the product to the manufacturer.
To clean the propeller of fi lamentary bodies, it may be suffi cient to start the mixer for a few seconds
with reverse rota on direc on.
If the mixer is used for occasional use, to avoid deposits and encrusta ons, it would be essen al to
clean it a er each service by immersing and mixing clean water. A er cleaning, wash the tank by
pu ng it in the same clean water.
WARNING: DO NOT FORCE THE MIXER TO START SEVERAL TIMES IF THE THERMAL
PROTECTION INTERVENT.
Before any maintenance and / or repair work, disconnect the power supply.
Never remove the mixer from the water when it is s ll running.
BELOW ZERO TEMPERATURES
The mixer does not freeze as long as it is running immersed in the liquid. If the mixer is extracted
from the water, thus being exposed to temperatures below zero, there is a danger that the propeller
will be blocked by frost. If the propeller is blocked by ice, you must immerse the mixer again in water
un l it has thawed.
Avoid using other faster methods (
eg hea ng it
), in order not to damage the machine.
STORAGE
If the mixer will be storaged:
• put it where it is protected against heat and humidity;
• taking care of stability carefully to avoid rolling or falling.
During this storage period it is recommended to rotate by hand from me to me
(at least every 2
months)
, to prevent the seals from s cking together.
If the mixer remains sta onary for more than 6 months, rota on becomes mandatory.
Before reusing the mixer, make sure that the propeller rotates freely.
