AFINIA LABEL DLP-2000 Скачать руководство пользователя страница 21

Страница: 21 / 43

Teaching the Mark Sensor

Before carrying out this procedure you should have the sensor already positioned to “see” the black
mark on your media, as outlined on the previous page.

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on
the right to SET.

Once you have done this, press the orange button on the left once.

The display will flash and change to 2PntTch or something similar. Now inch the web a little so that the
laser is pointing onto the media color only. Press the 3
from SET to RUN.

Test that you have taught the sensor c
laser indicator should flash orange when it sees the black mark. This indicates that you have taught the
sensor correctly.

Inch the machine until you are on the next black mark and yo

Your mark sensor is sent already
instructions should be used if the sensor needs to be retrained for different media.

Teaching the Mark Sensor

Before carrying out this procedure you should have the sensor already positioned to “see” the black

your media, as outlined on the previous page.

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on
the right to SET.

Once you have done this, press the orange button on the left once.

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

laser is pointing onto the media color only. Press the 3
from SET to RUN.

Test that you have taught the sensor c
laser indicator should flash orange when it sees the black mark. This indicates that you have taught the
sensor correctly.

Inch the machine until you are on the next black mark and yo

Your mark sensor is sent already
instructions should be used if the sensor needs to be retrained for different media.

Teaching the Mark Sensor

Before carrying out this procedure you should have the sensor already positioned to “see” the black

your media, as outlined on the previous page.

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on

Once you have done this, press the orange button on the left once.

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

laser is pointing onto the media color only. Press the 3

Test that you have taught the sensor c
laser indicator should flash orange when it sees the black mark. This indicates that you have taught the

Inch the machine until you are on the next black mark and yo

Your mark sensor is sent already
instructions should be used if the sensor needs to be retrained for different media.

Before carrying out this procedure you should have the sensor already positioned to “see” the black

your media, as outlined on the previous page.

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on

Once you have done this, press the orange button on the left once.

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

laser is pointing onto the media color only. Press the 3

Test that you have taught the sensor correctly by inching the machine slowly past the next mark. The
laser indicator should flash orange when it sees the black mark. This indicates that you have taught the

Inch the machine until you are on the next black mark and yo

trained to read a black mark on white media. The follow

instructions should be used if the sensor needs to be retrained for different media.

Before carrying out this procedure you should have the sensor already positioned to “see” the black

your media, as outlined on the previous page.

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on

Once you have done this, press the orange button on the left once.

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

laser is pointing onto the media color only. Press the 3

button once more and set the small switch

orrectly by inching the machine slowly past the next mark. The

laser indicator should flash orange when it sees the black mark. This indicates that you have taught the

Inch the machine until you are on the next black mark and yo

trained to read a black mark on white media. The follow

instructions should be used if the sensor needs to be retrained for different media.

Before carrying out this procedure you should have the sensor already positioned to “see” the black

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on

Once you have done this, press the orange button on the left once.

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

button once more and set the small switch

orrectly by inching the machine slowly past the next mark. The

laser indicator should flash orange when it sees the black mark. This indicates that you have taught the

Inch the machine until you are on the next black mark and you are ready to run.

trained to read a black mark on white media. The follow

instructions should be used if the sensor needs to be retrained for different media.

Before carrying out this procedure you should have the sensor already positioned to “see” the black

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

button once more and set the small switch

orrectly by inching the machine slowly past the next mark. The

laser indicator should flash orange when it sees the black mark. This indicates that you have taught the

u are ready to run.

trained to read a black mark on white media. The follow

instructions should be used if the sensor needs to be retrained for different media.

Before carrying out this procedure you should have the sensor already positioned to “see” the black

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

button once more and set the small switch

orrectly by inching the machine slowly past the next mark. The

laser indicator should flash orange when it sees the black mark. This indicates that you have taught the

trained to read a black mark on white media. The follow

instructions should be used if the sensor needs to be retrained for different media.

Before carrying out this procedure you should have the sensor already positioned to “see” the black

Inch the media forward until the laser is pointing directly onto the black mark. Set the small switch on

play will flash and change to 2PntTch or something similar. Now inch the web a little so that the

button once more and set the small switch

orrectly by inching the machine slowly past the next mark. The

laser indicator should flash orange when it sees the black mark. This indicates that you have taught the

Содержание DLP-2000












































Результаты поиска

Содержание DLP-2000

Отзывы:

AFINIA LABEL DLP-2000, Руководство пользователя, Страница: 21 / 43

Результаты поиска

Содержание DLP-2000

Отзывы: