AfiMilk MPC 3, Руководство по установке

Страница: 35 / 116

AfiMilk MPC
Installation Manual
35
Mounting Components
Chapter
4
8.
Connect the solenoid ports to vacuum and clean air
o
Milk meter solenoid is plugged at a socket in the lower cover of the
milk meter. The solenoid has two ports – for vacuum and exhaust.
o
Connect the solenoid to the vacuum line via the larger diameter
port and to the clean air line via the smaller diameter port.
9. Connect each milk meter solenoid ports to their
corresponding Vacuum/Air-line using the supplied flexible
¼”tube. Tube length should be as short and straight as
possible, without unnecessary bends.
Washing the Vacuum Line
After lines are installed, regardless of the type of connectors used, wash
the vacuum line as described below:
1. Prepare a pail half-full of warm water.
2. Disconnect the last flexible tube (on the upper end of the line) from the
MM solenoid and dip it in the water.
3. Briefly operate the vacuum pump. Water will be pumped into the line.
Allow the water to drain through the drain valve.
Solenoid Ports
Exhaust Port
Vacuum Port