manualshive.com logo in svg

Aficio AP3800C, Руководство по обслуживанию

Поделиться
Скачать
Aficio AP3800C Скачать руководство пользователя страница 28

FIRMWARE UPDATE PROCEDURE

26 April, 2002

5-8

Updating the lpr Command

Preparation on the printer

1.  Turn the main switch on.
2. Wait until  Ready  is displayed.

3. Print out 

Configuration

 

Page

 in case you need to refer to the current settings.

4.  Connect the printer and the PC with the Ethernet cross cable.
5. Select the menu  Network Protocol Setup."
6.  Select the submenu  TCP/IP-Ethernet,  and change the setting from  No  to

Yes."

7.  Select the submenu  Eth. IP Address,  and input the IP address. (e.g.

133.139.157.101)

8.  Select the submenu  Eth. Subnet Mask,” and input the address mask. (e.g.

255.255.255.0)

9.  Select the submenu  Gateway Address,  and input the gateway address.

(e.g. 133.139.157.001)

10. Select the submenu  Enable AppleTalk,  and change the setting from  Yes

to  No."

11. Press the 

Cancel

 key. The system reboots automatically.

12. Open the front cover.

Preparation on the PC

1.  Set the TCP/IP address for your PC. (e.g. 133.139.157.010)

NOTE: 

Do not use the IP address of the printer.

2.  Set the Subnet Mask (e.g. 255.255.255.0).
3.  Reboot the PC.

Upgrade Procedure

1.  Check that the printer front cover is open.
2.  Use Run in the Windows Start Menu.
3.  Transfer the firmware to the printer by using the lpr command.

(e.g. lpr -S 133.139.157.101 -P xjdirect “Firmware File Name")

NOTE: 

In the example,  Firmware File Name” indicates the file name of the
firmware.

Ready

G082S910.WMF

Содержание AP3800C

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды