Afar AR24027, Руководство оператора

Страница: 9 / 100

AR24027 Operator’s Manual
1-2
The AR24027 can be configured over a local serial interface or over the Ethernet using an “Ethernet
console” program provided by Afar. Once a unit is configured with an IP address you can also
configure and monitor the unit using Telnet or SNMP. The radio firmware, in non-volatile memory,
can also be updated remotely.
1.2 Radio Components
Table 1.1 below shows the part numbers of various components and accessories that are available in
connection to the
AR24027 radio. Some of these components are optional and may be purchased
separately.
Refer to section 3.2, Field Installation, for a description on how to assemble some of these
components.
Table 1.1 - AR24027 Components and Accessories
Description Part No.
AR24027 outdoor unit. AR24027
Bracket hardware for securing the AR24027 unit to an outdoor mast. KIT-0601
Ground Lug and washer for connection to Earth Ground
AC Power Inserter Module with 110-240 VAC power supply PWI-0103
DC Power Inserter Module with pigtail for external DC connection (
1
) PWI-0106
DC/DC converter for operation from –48 VDC (
1
) PWS-0148
CD with this Operator’s Manual, Econsole program, and other application notes.
CAT 5 cable for connection between AR24027 radio and power inserter module (
1
) CBL-0503-xxx
Auxiliary port cable for RS-232 connection (
1
) CBL-0403
Auxiliary port cable with Audio jack for antenna alignment (
1
) CBL-0404
2.4 GHz Lightning arrestor for the antenna ports (
1
) SUP-0201
Surge suppressor for the Ethernet and Power CAT5 cable (
1
) SUP-0202
1 Not supplied with standard radio kit. Available from AFAR as optional equipment.
1.3 Radio Connectors
Figure 1.1 shows the AR24027 radio mounted on a mast. The radio is housed in a rectangular
enclosure with two N-female connectors at the top for connection to RF antennas, and two special
purpose connectors, at the bottom, for DC power, Ethernet data and control.
The function of each connector is described in the table below.