Afag CS 16/30, Руководство пользователя

Страница: 39 / 49

38 CS 16 - CS 20 - OI-vers. 5.3 gb. 20190312
CAUTION
The module or the station must not be pressurised when the ZA intermediate stop is
fitted to an installed CS module!
Depending on the available space you must decide whether the CS module should be
dismounted to retrofit it with a ZA.
Limbs may be squeezed by moving components.
Repeat the procedure described above!
Modification of the ZA for the reverse direction of action (retracting)
Disassemble the ZA carefully according to the figure shown above!
Turn the catch with gear at the piston rod in the other direction.
- Insert cylinder with the catch into the housing
- Mount the cover
-
Make sure that the cylinder connections are on the opposite side of the catch
-
Fit cylinder and housing cover screws and tighten.
CAUTION
The catch must be greased!
The grease is missing on the pictures so that the individual parts are clearly visible! Ensure
that the air connections at the cylinder are not positioned at the side of the catch!
Lever and gear
Cylinder