Afag CS 16/30, Руководство пользователя

Страница: 29 / 49

28 CS 16 - CS 20 - OI-vers. 5.3 gb. 20190312
3.2.9 Check of the final position in the total stroke range
The complete mounting kit, consisting of
1 Special screw M6
1 Lock nut
1 Clamping sleeve
must be used for this.
It can be ordered under the
order no. 50242140
.
The screw head is used as reference and the screw can be adjusted – depending on the desired combination -
using the shock absorber. Due to the adjustability of the screw, the final position can now be sensed over the
entire stroke range by means of an inductive sensor.
Sensor is referenced at the adjustable Final position control at max. stroke
screw head
Stroke reduction
Can reduce stroke by turning the bar of the user application
Use the bar remove and rotate when the stroke has to be further reduced. By screwing a screw into the thread in
the middle (see arrow), the use of bar, take out the bar, the use should be facilitated.
Before after
after normal state of reduced stroke
3.3.0 Start-up of the CS Compact Slide
 Aerate the total system slowly.
 Pay attention to the permissible values (technical data) regarding:
- load capacity
- motion frequency
- moment loads on the guide system