Afag CS 16/30, Руководство пользователя

Страница: 18 / 49

CS 16 - CS 20 - OI-vers. 5.3 gb. 20190312 17
3.1.6 Warranty
3.1.7 Areas of application
The CS Compact Slides are exclusively designed for the linear movement of load capacities of up to 2.0 – 3.0 kg
(CS 16); (CS 20 to 5 kg), in any position on the slide and maximum 1.5 - 2.0 kg (CS 16); (CS 20 to 4.0 kg) at the
face side of the module; the load capacities should not affect persons, property or the environment. They can also
be used in combination with other modules than Pick & Place machines, the permissible load capacities should,
however, not be exceeded.
Any other use is regarded as inadequate.
NOTE
The manufacturer does not accept any liability for damage resulting from such use.
The risk is that of the user alone.
Intended use also includes paying attention to the Montage instructions and observing the maintenance and
repair instructions specified by the manufacturer.
The CS module may only be operated and serviced by correspondingly trained personnel who have also profound
knowledge of the dangers.
CAUTION
The applicable regulations for prevention of accidents and the other generally
accepted safety-relevant and occupational safety and health regulations are to be
followed.
The term of the warranty on Afag handling components and systems is:

24 months following commissioning, but a maximum of 27 months following delivery.

Wear parts (e.g. shock absorbers) are not covered by the warranty. *
The warranty covers the replacement or repair of defective Afag parts. No further claims will be accepted.
The warranty will be voided in event of the following:

Use for other than the intended purpose

Failure to observe the notes on installation, commissioning, operation and maintenance in the operating manual

Improper installation, commissioning, operation and maintenance

Independent repairs and constructional changes without prior instruction by Afag Automation AG

Removal of the serial number on the product

Using the module without shock absorbers, or with defective shock absorbers

Inadequate monitoring of wear parts
*A customer has the right to a defect-free product. This is also applicable for accessories and wear parts, if they are
defective.
However, wear does not fall within the scope of the warranty.