Aethra vega X5, Руководство пользователя

Страница: 82 / 108

82
Mode
(only for MCU ISDN or Mixed)
Multiple of 64K
Multiple of 56K.
Cascade Role
,
Master
or
Slave
This option allows you to set up cascaded MCUs in a two-level hierarchy tree.
Corresponding to the base node of the cascade there is the Master System,
with Slave Systems for the child nodes.
Note
In a mixed-mode MCU session, the user can choose to substitute NIC protocol for ISDN.
So in a multiconference with an active NIC connection, no ISDN connections are allowed,
and in a multiconference with an active ISDN connection, no NIC connections are allowed.
How to start a multiconference
To establish a multiconference:
1. From the
H
OME
P
AGE
, select the VIDEO icon, or press the
Call
key on the
remote control. You will enter the
A
UDIO AND
V
IDEO CALL
page.
2. Choose desired MultiConference type: MCU IP, MCU ISDN, MCU (mixed
mode).
3. Chose the desired rate and number of participants.
4. If the MCU has not been configured, it is possible to enter the configuration
menu previously described by selecting the CONFIGURE MCU icon and
pressing
OK
.
5. If the MCU has already been configured, go to the Active Conference icon
and press
OK
to start the multiconference. The same can be obtained by
pressing the
CALL
key on the remote control.
6. Local video will be displayed at full screen.
7. To add participants, press the remote control
CALL
key
8. To disconnect participants, press the remote control
DISCONNECT
key.