Aethra vega X5, Руководство пользователя

Страница: 48 / 108

48
Dropdown Menu Monitor Menu (default setting: Automatic).
In case the TV1+ HighDefTV configuration has been chosen, so to have two
monitors connected to the system, is possible to choose where to see GUI
(Graphical user interface). Available configurations are:
Automatic
GUI set by the system
TV
1
GUI always on TV1
TV
2
GUI always on TV2
HDTV
GUI always on XGA/DVI-I
HDTV AUX
GUI always on XGA/DVI-I
Video outputs
Referring to the selected (or automatically recognized by the system)
Monitors number, in the lower area of the page the active video outputs are
highlighted, and you can select:
•
16:9
check box,
•
XGA/DVI
resolution
,
•
DigitalDVI
check box (for High Definition monitors only).
TV1: connect a monitor or an analogical TV to TV1 video output
(point
2
of “Cabling Scheme” - RCA or Y/C connector, symbol
or ).
16:9 check box (use only with 16:9 monitors). If you select 16:9 check
box , the system adds vertical side banners in order to scale full screen
video image from 4:3 to 16:9.
TV2: connect a monitor or an analogical TV to TV1 video output
(point
2
of “Cabling Scheme” - Y/C connector, symbol ).
16:9 check box (use only with 16:9 monitors). If you select 16:9 check
box , the system adds vertical side banners in order to scale full screen
video image from 4:3 to 16:9.
HDTV : connect a monitor with a DVI-I connector to XGA/DVI-I video
output, or a monitor with a XGA connector through DVI-I/XGA adapter
(“OUTPUT” DVI-I connector, see “Cabling Scheme”)
use in dropdown menu the correct Resolution for used monitor.
16:9 check box ( use only with 16:9 monitors ). If you select 16:9 check
box , the system adds vertical side banners in order to scale fullscreen video
image from 4:3 to 16:9.
If you use a High-Definition digital monitor you have to select Digital DVI
check box .