Aethra vega X5, Руководство пользователя

Страница: 35 / 108

35
Video Input Management
It is possible to manage different video inputs by selecting them using the remote
control keys
Camera
. The function keys
Red
–
Yellow
-
Camera
, can be configured to
be associated with any available video input. Possible choices include:
Room camera
XGA/DVI-I video input
Whatever video peripheral with composite signal (e.g. camera or VCR)
Note: The desired video source must be connected to the System inputs on the back of the
equipment beforehand. For a correct setup of the function keys, see the chapter “Audio-
Video-Data”, section “Camera”.
During a connection it is also possible to control not only the local video camera’s
zoom and panning functions but also those of the remote camera (if enabled). Use the
remote control key
Far/Near
to select remote or local camera.
Field of View and Zoom
You can control field of view and zoom in two ways:
•
From the
H
OME
P
AGE
, using the remote control, go to the “video window” and press
OK
. Adjust
the video camera’s field of view with the arrow keys and press OK on the remote control.
•
From the
H
OME
P
AGE
, go to the Magnifier icon on the status bar and press
OK
. You will see
a full screen display with the camera under your control. To release camera control, press
OK
.
Using the XGA/DVI-I IN/OUT
In the system rear panel there are an XGA/DVI-I input to connect a personal
computer. For a correct cabling, see the “cabling scheme”.
Correct use of the
XGA/DVI-I implies that the video PC configuration has been set
(setting: screen → properties) with one of the following picture frequency limits (or
refresh frequencies).
Resolution Refresh Frequency (Hz)
640 x 480 60, 70, 72, 75, 85
800 x 600 60, 70, 72, 75, 85
1024 x 768 60, 70, 72, 75, 85
1280 x 1024 60, 70, 75