Aesculap GT205, Инструкция по эксплуатации

Страница: 7 / 100

5
4. Working with the battery-
powered shearing machine
FAV5 CL, and the charger
GT203/Li-ion battery GT201
4.1 System set-up
4.1.1 Connecting the accessories
Combinations of accessories that are not mentioned in
the present instructions for use may only be employed
if they are specifically intended for the respective
application, and if they do not compromise the perfor-
mance and safety characteristics of the products.
4.1.2 Connecting the charger/Charging the
Li-ion battery
Note
Switch off the battery-powered shearing machine
FAV5 CL before charging!
Note
Li-ion batteries heat up slightly during charging.
Note
Unplug the mains power cord at the mains socket when
the charger is not going to be used!
¾
To connect charger 1 : Plug in the device plug of
mains power cord 2 in charger 1 .
¾
Plug in the mains plug of mains power cord 2 at
the mains power socket.
WARNING
Fire hazard due to battery poles
shorted by fluids or metal compo-
nents!
¾
Li-ion battery not inserted.
WARNING
Risk of injury and material damage
due to damaged Li-ion batteries!
¾
Prior to charging, check the Li-
ion batteries for any damage.
¾
Do not use or charge damaged
Li-ion batteries.
CAUTION
Loss of capacity/performance due
to prolonged storage of discharged
Li-ion batteries!
¾
Store Li-ion batteries only in
fully charged condition and
recharge stored batteries once
every month.
CAUTION
Destruction of the product, charg-
ing bay or Li-ion battery when
inserting the wrong type of battery
in the charging bay!
¾
Insert Li-ion batteries only in
the appropriate charging bay.
¾
Insert the Li-ion battery in the
correct position.