Aesculap GT205, Инструкция по эксплуатации

Страница: 5 / 100

3
1. Safe handling
CAUTION
Federal law restricts this device to sale by or on
order of a physician!
¾
Prior to use, check that the product is in good
working order.
¾
Store the charger and Li-ion batteries at room tem-
perature.
¾
Keep dry the charger and Li-ion batteries.
¾
Charge the Li-ion batteries prior to first use.
¾
Observe our “Notes on Electromagnetic Compati-
bility (EMC)“.
¾
To prevent damage caused by improper setup or
operation, and in order not to compromise war-
ranty and manufacturer liability:
– Use the product only according to these instruc-
tions for use.
– Follow the safety and maintenance instructions.
– Ensure the manufacturer's approval before using
accessories that are not mentioned in the instruc-
tions for use.
¾
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
¾
Keep the instructions for use accessible for the
user.
¾
Always adhere to applicable standards.
¾
Ensure that the electrical facilities in the room in
which the device is being used conform to IEC
norms.
¾
Unplug the device by pulling the plug, but never by
pulling the power cord.
¾
Do not operate the product in explosion-hazard
areas.
¾
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.
2. Product description
2.1 Package includes
2.2 Intended use of charger GT203/Li-
ion battery GT201
The charger GT203 is used for charging the battery-
powered shearing machine FAV5 CL and the Li-ion
battery. There is one charging bay each for the two
components.
DANGER
Risk of fatal injury from electric
shock!
¾
Do not open the product (except
for changing a charging bay).
¾
Connect the product only to a
grounded power supply.
Designation Art. no.
2 x Li-ion batteries GT201
1 x Charger GT203
Mains power cord (with device
plug) see Chapter
Accessories/
Spare parts