Aerservice Equipments RECARM, Инструкция по установке и эксплуатации

Страница: 38 / 44

Tel. +39 049 641 679 | commerciale@aercomponents.it | www.aercomponents.it
38
EN
8.7 MASTER-SLAVE AIR FLOW MODE
To get into this mode, repeatedly press the button FLOW (
F
) of remote control, to see the image
below on display.
In this mode the IMPELLER
button (
V
) is active to select
the desired speed.
In this mode the units generate a continuous air flow going from MASTER or SLAVE SAME AS
MASTER units to SLAVE OPPOSITE TO MASTER excluding heat recovery.
Advise for use
Recommended mode to isolate odors in a room, like in the kitchen, generating a continuous
air flow towards it.
This is also suitable for use as free-cooling in summer season, in fact when external
temperature is lower than internal one, there is no need to recover heat but to blow fresh air
into the house.
By pressing the specific function button all the units will constantly run in the desired direction
with the possibility to change the speed as required.
8.8 SLAVE-MASTER AIR FLOW MODE
To get into this mode, repeatedly press the button FLOW ( F ) of remote control, to see the image
below on display.
In this mode the IMPELLER
button (
V
) is active to select
the desired speed.
In this mode the units generate a continuous air flow going from SLAVE OPPOSITE TO MASTER
to MASTER or SLAVE SAME AS MASTER units excluding heat recovery.
Advise for use
Recommended mode to isolate odors in a room, like in the kitchen, generating a continuous air
flow towards it.
This is also suitable for use as free-cooling in summer season, in fact when external
temperature is lower than internal one, there is no need to recover heat but to blow fresh air
into the house.
By pressing the specific function button all the units will constantly run in the desired direction
with the possibility to change the speed as required.