Aerservice Equipments RECARM, Инструкция по установке и эксплуатации

Страница: 33 / 44

Tel. +39 049 641 679 | commerciale@aercomponents.it | www.aercomponents.it
33
EN
In the scheme below see the 6 dip switches 0/1 needed to create one coding for each system.
Factory setting of dip switches is “0” (OFF), thus recommended to set on 1 (ON)
at least one of the dip switches to uniquely codify the system.
7.1 CONFIGURATION RESET
In case of mistakes in the configuration of the units through dip switches, both for system
coding (WIRELESS version) and for MASTER-SLAVE configuration (ACTIVE and WIRELESS
version) please follow the instructions:
– Switch OFF the unit through main switch
– Change the configuration of dip switches as needed
– Switch ON the unit through main switch
The unit is properly set with the new configuration.
By keeping the unit ON, no change of configuration is possible. The unit will
continue to run as per previous setting.
WARNING
WARNING