7
# 6
(2) 4-40x300mm threaded pushrods
(2) 4-40 Solder threaded coupler with
nuts
(4) 4-40 Ball Links
(4) 4-40x16mm hex head bolts
(4) 4-40 lock nuts
(4) Brass spacers
(4) 3mm flat washers
(2) Throttle Servo Tray
# 7
(1) 750cc Gas Fuel Tank with Rubber
Stopper
(2) Brass Barbs for fuel line
(2) Fuel Filler Dots – 1 male and 1
female
# 8
(2) Pre Assembled Wing Struts
(4) 6-32x20mm hex head bolts
(4) 6-32x12mm hex head bolts
(8) 6-32 lock nuts
(4) Pins
(1) L hex wrench
(1) Wrench (Fits 6-32 / 8-32)
(2) Foam Pads for protecting wing
# 9
(1) 32dia. x780mm aluminum wing
joiner – black anodized
(4) 8-32x25mm hex head bolts for
wing mounting
(4) #8 bonded washers
# 10
(4) L steel connectors for stab
mounting
(2) 6-32x10mm hex head bolts
mounting connector with Rear of
fuselage
(4) 6-32x15mm hex head bolts
mounting connector with Front of
fuselage and Front of stab
(2) 6-32x20mm hex head bolts
mounting connector with Rear of
stab
(4) 6-32 lock nuts mounting
connector with stab
(4) 8x3.2mm flat washers
(1) 5x191mm carbon stab tube
# 11
(4) Tail Flying Wires – pre-made
(3) M2x25mm Phillip head bolts
(3) M2 hex nuts
(2) T2.6x16mm PWA screws
# 12
(1) 3/4” thick Hardwood Spacer Block for
mounting engine DA50/DLE55
(1) Engine mounting template for DA 50/
DLE55
(1) Universal Engine Mounting Template
(1) 8x11” Card Stock Material for the
template for cutting of cowling
(1) 6x160x70mm foam for fuel tank
(2) 8x80x300mm Sponge for receiver and
battery
(4) 356x12.5mm Velcro
(6) 8x450mm Nylon Ties for fuel tank
mounting
(10) 3x150mm Nylon Ties for the fuel line
(1) 12mm aluminum insert
(6) Rubber Grommets – 2 each - size
6,8,10 for fuel line and wire guide
(1) Small Paper Degree Meter for the
rudder
# 13
(1) Customer Throw Meter
# 14
(1) C.G. Buddy
# 15
(24) 6.35mm Aluminum Engine Stand
offs
# 16
(1) 300x300mm Cub Yellow (
#884
)
Ultracote™
covering
OR
(1) 300x300mm White (
#870
)
Ultracote™
covering
(1) 300x300mm True Red (
#866
)
Ultracote™
covering
# 17
(1) Manual CD
# 18
(1) Decal Sheet
