5
KIT CONTENTS
150cc Extra 300
BASIC AIRCRAFT PARTS:
Fuselage with pre
-installed vertical fin – covered, fire-
wall fuel-proofed, pre-drilled three holes for the tail wheel
assembly::
(4) 8-32 blind nuts installed for main landing gear
(4) 4-40 blind nuts installed for the mounting of the
stab.
(2) 4-40 blind nuts installed for the mounting of
cowling
bottom.
(4) 6-32 blind nuts installed for the mounting of
cowling
top.
(2) 4-40 blind nuts installed for the mounting of the
gear hatch cover
(6) 4-40 blind nuts installed for the mounting of the
tunnel
hatch
(12) 4-40 blind nuts installed for the mounting of the
canister and long pipe mounting brackets
(1) Top hatch cover of engine box – fuel-proofed
with AW logo installed by (4) T2.6x10mm PWA
screws
(1) Landing Gear hatch cover installed by (2) 4-
40x20mm Hex head bolts and
(2) 3 flat washers
(1) Bottom Hatch for canister pre-installed by (6) 4-
40x10mm Hex style Bolts and (6) 3 flat washers
(2) L aluminum, 1 left and 1 right installed by
M4x20mm Hex bolts and M4 locks and 4mm flat
washers
Canopy base—painted,
with (4) 4-40 blind nuts
installed
(1) Tinted Canopy—glued on the canopy base an-
painted, installed on the fuselage by (4) 4-
40x16mm hex style bolts
(4) #6 bonded washers for the mounting of the
canopy
(4) 3mm split lock washers for the mounting of the
canopy
(2) 3.5x1250mm Antenna tube installed
(2) 3.5(o.d.) x120mm pull-pull exit tube installed
Left Wing with Aileron
– covered: Pre-drilled for the
mounting of the control horns
(2) 8-32 blind nuts installed for the wing mounting.
(2) locator pins installed pre-drilled holes for cotter
pins.
(12) pin point hinges glued
(2) Aileron servo string installed
