14
5.
Pull the servo lead through the root end of the
wing.
6.
Attach the 12” Extension to the inboard servo
lead and secure with an Aeroworks safety
clip. Ensure the connectors will not come
apart from vibration or light tension. Pull the
servo lead out the root of the wing and secure
leads to inside of wing with tape or Velcro.
This will prevent the extensions from slipping
back into the wing.
7. Install servo in servo well with the output shaft
toward the leading edge of the wing. Use a 1/16
bit to drill servo mounting holes.
Note:
Servo arms go towards wing tips.
4. Remove the balsa stick with the pull string from
the servo well and tie the pull string to the servo
lead as shown.
W
in
g
Ti
p
