Aerotech ECO165SL Series, Руководство по оборудованию

Страница: 49 / 60

How to Mount a Motor
1. Remove the hard cover from the stage.
2. Locate the Shaft Coupling access holes (refer to
Figure 4-3 ).
3. Test fit the Motor and Shaft Coupling to the Stage to ensure that you have access to the Shaft
Coupling clamp screws.
4. Apply a small quantity of either Loctite 242 or Loctite 248 to motor and coupling hardware.
5. Attach the Shaft Coupling to the Motor shaft (refer to
Figure 4-4 ). Refer to Table 4-1 for the
correct hardware and torque requirements.
Figure 4-4: Attach the Coupling Adapter to the Motor Shaft
6. Attach the Motor to the Stage in the correct orientation ( Figure 4-5 ). Use a hex wrench to ensure
that the motor flange is fully seated and the hardware is tight. The motor housing prevents the
use of a torque wrench.
Figure 4-5: Attach the Motor the Stage
ECO165SL Hardware Manual 4.3. Motor Mounting
www.aerotech.com 49