Aerotech Automation1 XL2e, Руководство по оборудованию

Страница: 73 / 92

3.5. Digital Inputs [-EB1]
Input bits are arranged in groups of 4 and each group shares a common pin. This lets a group be
connected to current sourcing or current sinking devices, based on the connection of the common
pin in that group.
To be able to connect an input group to current sourcing devices, connect the input group's
common pin to the power supply return (-). Refer to
Figure 3-15 .
To be able to connect an input group to current sinking devices, connect the input group's
common pin to the power supply source (+). Refer to
Figure 3-16 .
The digital inputs are not designed for high-voltage isolation applications. They should only be used
with ground-referenced circuits.
Table 3-17: Digital Input Specifications [-EB1]
Input Voltage Approximate Input Current Turn On Time Turn Off Time
+5 V to +24 V 6 mA 10 µs 43 µs
Table 3-18: Digital Input Connector Pinout [-EB1]
Pin# Description In/Out/Bi Connector
1 Input Common for Inputs 0-4 Output
2 Input 0 (Optically-Isolated) Input
3 Input 1 (Optically-Isolated) Input
4 Input 2 (Optically-Isolated) Input
5 Input 3 (Optically-Isolated) Input
6 Input Common for Inputs 4-7 Output
7 Input 4 (Optically-Isolated) Input
8 Input 5 (Optically-Isolated) Input
9 Input 6 (Optically-Isolated) Input
10 Input 7 (Optically-Isolated) Input
Table 3-19: Mating Connector Part Numbers for the Digital Input Connector [-EB1]
Mating Connector Aerotech P/N Third Party P/N
Wire Size: mm 2 [AWG]
10-Pin Terminal Block ECK02395 Phoenix 1700841 0.5 - 0.14 [20-26]
Figure 3-14: Digital Inputs Schematic [-EB1]
XL2e Hardware Manual 3.5. Digital Inputs [-EB1]
www.aerotech.com 73