20
2. Position the wing so that the control frame is on bottom. Remove the sail mount fixing screws
from the outer leading edge tubes and mark the corresponding holes with indelible marker (Fig.
42).
Figure 42
Figure 43
Figure 44
3. Remove all battens from the sail including
the keel batten. Remove fixing tangs that fix
the nose part of the sail to the nose bolts (Fig.
43).
4. Detach the rear bottom wire and the keel
pocket fixing tang from the keel tube (Fig. 44).
Note: Reassemble the hardware removed in
its place in original order so that it doesn’t get
lost. All disassembled assemblies on the wing
must be reassembled in the proper order and
orientation.
5. Dismount the main sprogs as shown on the
figures 45 and 46. Check that the sprog lock
nut is tighten hard.
Figure 45
Figure 46
