15
where you feel resistance, and do not attach the Velcro ties tight so as to induce creases in the
Mylar or leading edge sail material.
Working from the trailing edge, roll the sail tightly to the leading edge. Finish rolling the sail in
the area of the outer sprogs and install the wing tip cover bags.
15. Install the leading edge / cross bar protection bags on the wing (Fig. 35).
Figure 35
Figure 36
Figure 37
16. Install protection bags on the control frame
apex, hang bracket (with the hang bracket
positioned upside down) and on the crossbar
central unit as shown on the figures 36 and 37.
Stow the battens in the batten bag in the front
part of the wing. Install the Velcro sail ties
around the wing.
WARNING
FOLDING THE WING WITHOUT THE HANG
BRACKET
PRORTECTION
BAG
WILL
CAUSE THE CROSSBAR TUBES DAMAGE.
17. Install the wing bag. Lower the wing on the ground.
18. Detach the control bar.
19. Fold up the control frame and install the control frame bags, lay the control frame against
the keel.
20. Fit the control bar in the protection bag and stow it between the leading edges in the aft part
of the wing. Stow the nosecone under the most forward Velcro.
21. Zip the wing protection bag up.
