Aeroflex 8210A-2-5 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 56

Aeroflex 8210A-2-5 Скачать руководство пользователя страница 51

Model 8210A-2-5

IM-377

Aeroflex / Weinschel

51

13. Contacting Aeroflex / Weinschel:

In the event of a malfunction, contact Aeroflex / Weinschel. An apparent malfunction of an instrument or

component may be diagnosed over the phone by first contacting the Customer Service Department at Aeroflex /
Weinschel. DO NOT send the instrument or component back to the factory without prior authorization. When it is
necessary to return an item, state the symptoms, catalog and type number of the instrument or component, and date
of original purchase. Also write the Company name and your name and phone number on a card and tape the card to
the item returned. Page provides further information regarding preparation of a unit for reshipment. Contact Aeroflex /
Weinschel’s Customer Service Department as follows:

Via mail:

Aeroflex / Weinschel, Inc.
5305 Spectrum Drive
Frederick, MD 21703-7362
U.S.A.

Via Fax:

301-846-9116

Via Phone:

Call TOLL FREE 800-638-2048
Toll call # 301-846-9222

Via Website:

http://www.aeroflex-weinschel.com/

Via e-mail:

[email protected]

14. Aeroflex / Weinschel Warranty:

PRODUCTS – Aeroflex / Weinschel, Inc.

warrants each product it manufactures to be free from defects in material

and workmanship under normal use and service anywhere in the world. Aeroflex / Weinschel’s only obligation under
this Warranty is to repair or replace, at its plant, any product or part thereof that is returned with transportation
charges prepaid to Aeroflex / Weinschel by the original purchaser within ONE YEAR from the date of shipment.

The foregoing Warranty does not apply Aeroflex / Weinschel, Inc.’s sole opinion to products that have been subject to
improper or inadequate maintenance, unauthorized modifications, misuse, or operation outside the environmental
specifications for the product.

SOFTWARE PRODUCTS- Aeroflex / Weinschel, Inc.

software products are supplied without representation or

Warranty of any kind. Aeroflex / Weinschel, therefore, assumes no responsibility and will not accept liability
(consequential or otherwise) arising from the use of program materials, disk, or tape.

The Warranty period is controlled by the Warranty document furnished with each product and begins on the date of
shipment. All Warranty returns must be authorized by Aeroflex / Weinschel prior to their return.

Aeroflex / Weinschel’s Quality System Certified to:

© 2003-2008 Aeroflex / Weinschel, Inc.

«
...
49
50
51
52
53
...
»

Содержание 8210A-2-5

























































Отзывы:

Нет отзывов