Aeroflex 8210A-2-5 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 56

Aeroflex 8210A-2-5 Скачать руководство пользователя страница 35

Model 8210A-2-5

IM-377

Aeroflex / Weinschel

35

7-16. Macro Commands

MACRO Function:

Define a macro

Syntax:

MACRO

name text

Argument(s):

name

string10

macro name

text

string

macro body

Remarks:

This function is used to define a macro. The macro name may be any user-defined

string, and may also be the same as internal commands. The macro text defines the command(s)
that will be executed when the macro is invoked. Macros allow for up to 9 replaceable parameters,
which are designated $1, $2, up to $9. The special macro name "POWERON" is reserved for
defining a macro that will automatically be executed by the system during the power-up configuration
phase. The user may define up to 32 additional macros. Attempting to define more than the allowable
number of macros will result in an execution error, and the user must delete an existing macro to
make room for the new definition. A list of the currently defined macros may be obtained with the
LIST? MACRO command. Macros can be up to 128 characters in length, and may be stored in the
non-volatile memory via the SAVE MACRO command. If a macro name is the same as an internal
command, the macro replaces the internal command. Macro expansion may be enabled/disabled with
the EMC command.

Return Value:

none

Example(s):

MACRO "POWERON" "EMC 0; ATTN -1; EMC 1"

MACRO? Function:

Read a macro definition

Syntax:

MACRO?

name

Argument(s):

name string10 macro name

Remarks:

This function is used to read a macro definition.

Return Value:

text

string

macro body

Example(s):

MACRO? "POWERON" returns "EMC 0; ATTN -1; EMC 1"

LIST? MACRO

Function:

Read list of macro names

Syntax:

LIST? MACRO

Argument(s):

none

Remarks:

This function is used to read a list of the currently defined macro names that have

been created via the MACRO command. It returns a count of the macros, and for each the macro
name.

Return Value:

count

integer

count of names name string10 name

Example(s):

LIST? MACRO returns the following ’1, POWERON’

EMC

Function:

Enable/Disable macro expansion.

Syntax:

EMC

ena

Argument(s):

ena

integer

enable flag

Remarks:

This function is used to enable or disable macro expansion. If the value of

ena

is 0,

than macros are disabled. Any other value enables macro expansion.
Return Value:

none

Example(s):

EMC 0

EMC?

Function:

Read macro state

Syntax:

EMC?

Argument(s):

none

Remarks:

This function is used to read the state of the macro enable flag.

Return Value:

0, macros are disabled

1, macros enabled

Example(s):

EMC? returns ’1’

«
...
33
34
35
36
37
...
»

Содержание 8210A-2-5

























































Отзывы:

Нет отзывов