Aeroflex 8210A-2-5 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 56

Aeroflex 8210A-2-5 Скачать руководство пользователя страница 11

Model 8210A-2-5

IM-377

Aeroflex / Weinschel

11

Figure 4. Model 8210A-2-5 Internal Switch Locations

6-2. Serial Operation. The serial interface (RS232/RS422) provides a means of remotely programming the 8210A-
2-5 via external computer. The 8210A-2-5 provides for user-selectable communications parameters via a DIP switch
(SW1), including baud rate, data format, and handshaking method. LED indicators are provided for transmit (TX) and
receive (RX) activity. Selection between RS232/RS422 mode is controlled via an internal 4 position DIP switch SW2,
which also provides for user-selectable 120 ohm terminations for the RS422 receiver lines. The RS422 mode
transceivers are electrically compatible with RS-422 or RS485.

SW2 RS232

RS422
RS485

Description

1 OFF

User

Select

CTS Termination
On = Termination
Off = No Termination

2 OFF

User

Select

RXD Termination
On = Termination
Off = No Termination

3 OFF

ON

RI/RTS

Select

4 ON

OFF

Serial

Mode

On = RS232
Off = RS422

The data format includes a start bit, eight data bits, and one stop bit (N81). The Baud Rate may be set to

2400, 9600, 19200, or 34800. Parity selections include settings for None, Even, or Odd parity. Handshaking may be
enabled, if desired, and the method may be set to either hardware (RTS/CTS) or software (XON/XOFF). For
interactive terminal use, echoing may be enabled, in which the 8210A-2-5 will echo all characters received back to the
terminal.

All data and commands are encoded using the ASCII character set. The syntax for commands is the same as

for GPIB operation, and uses the syntax structure defined by IEEE 488.2, with the exception of the command
termination rules. Commands sent to the 8210A-2-5 may be terminated with either an ASCII CR (0x0D) or ASCII LF
(0x0A) character. By default, all responses from the 8210A-2-5 are terminated in an ASCII CR/LF sequence (0x0D
followed by 0x0A).

«
...
9
10
11
12
13
...
»

Содержание 8210A-2-5

























































Отзывы:

Нет отзывов