Page 26/79 – v2.9
4.7.5.2.
Frequency
This button allows to set or visualize synchronization signal frequency
•
When Source button is set to INT: allows to set frequency.
•
When Source button is set to EXT: shows a measure of external
frequency.
4.7.5.3.
Mode
This button allows to choose internal gating mode
•
When Mode button is set to None: the Digital Output Signal will
remain unchanged.
•
When Mode button is set to Gate, Digital Output Signal will be
enabled when External Gate Input Signal is at high level, if this
External Gate Input is at low level, no signal will be emitted from
Digital Output Signal.
•
When Mode button is set to Burst: a number of pulse from the
Digital Input Signal will be emitted to Digital Output Signal when
a rising edge occurs on External Gate Input Signal. The number of
pulses emitted can be set using Burst Size box.
•
When Mode button is set to Soft: a number of pulse from the
Digital Input Signal will be emitted to Digital Output Signal when
clicking on Trigger button. The number of pulses emitted can be
set using Burst Size box.
4.7.5.4.
Burst Size
This button allows to change the number of pulses emitted in a burst
•
This box is only accessible when Mode box is set to Burst of Soft mode.
4.7.5.5.
Trigger
This button allows to trigger a burst manually
•
This box is only accessible when Mode box is set to Soft mode.
Содержание TOMBAK
Страница 19: ...Page 19 79 v2 9...
