AeroDiode TOMBAK, Руководство по эксплуатации

Страница: 77 / 79

Page 77/79 – v2.9
Cabling
Software configuration
First, you need to determine the delay between the signals. In this example (Figure 20),
we can observe a 840 µs delay.
We change the “resynchronization delay” value on the control software.
Note :
This delay must be a ratio of the clock period. In this case, we have a 10 MHz clock so the delay
can be for example :
- 100 ns
- 300 ns
- 18 µs