AeroClave mRDS Operator Manual
Released January 8, 2016
Page 9
Use or disclosure of data contained on this sheet is subject to the restriction on the cover page of this User’s Manual.
4.3 Decontamination Cycle Operation
4.3.1
The following section describes how to monitor a decontamination cycle using the
touchscreen controller, which is located in proximity to the treatment area.
4.3.2
These steps describe the process and screens regarding operation DURING a
decontamination cycle.
4.3.3
The touchscreen controller is used to monitor and control the mRDS through all phases of
its operation.
4.3.4
Activate the mRDS by following the steps described in Section 4.2.
4.3.5
Prior to the start of the decontamination process , the system will cycle through an initial
warning stage.
4.3.6
This “Warning Countdown” stage precedes all operation stages and allows for additional
time to ensure all safety criteria have been met (Figure 4).
4.3.7
After the “Warning Countdown” stage, the decontamination process will begin.
FIGURE 4
