AeroClave mRDS Operator Manual
Released January 8, 2016
Page 13
Use or disclosure of data contained on this sheet is subject to the restriction on the cover page of this User’s Manual.
4.4 Emergency Stop Operation
4.4.1
The following section describes mRDS’ emergency stop operation.
4.4.2
These steps describe the process and screens regarding emergency stop operation DURING
a decontamination cycle.
4.4.3
The mRDS emergency stop procedure initiates a total shutdown of the system.
4.4.4
To initiate an emergency stop, simply press the red “Emergency Stop” bar at the bottom of
the Touchscreen Controller (Figure 10).
4.4.5
Once an emergency stop has been initiated, determine the reason why emergency stop
occurred and attempt to resolve the situation.
FIGURE 10
