AeroClave mRDS Operator Manual
Released January 8, 2016
Page 7
Use or disclosure of data contained on this sheet is subject to the restriction on the cover page of this User’s Manual.
4.2 Decontamination Cycle Start
4.2.1
The following section describes mRDS operation set-up from the Touchscreen Controller.
4.2.2
These steps describe the process involved with initiating a decontamination cycle but do
NOT include information regarding operation during a decontamination cycle.
4.2.3
Only verified operator’s may access and operate the mRDS from the touchscreen
controller.
4.2.4
The Touchscreen Controller is used to monitor and control the mRDS through all phases of
its operation.
4.2.5
Activate the mRDS by pressing the “Start” button on the bottom-left corner of the
Touchscreen Controller “Default Screen” (Figure 1).
FIGURE 1
