AeroClave mRDS Скачать руководство пользователя страница 3

Страница: 3 / 16

AeroClave mRDS Operator Manual

Released January 8, 2016

Page 3

Use or disclosure of data contained on this sheet is subject to the restriction on the cover page of this User’s Manual.

1.0

INTRODUCTION

1.1

Purpose

The purpose of this manual, primarily, is to establish guidelines for the safe operation of the mRDS

system. Secondarily, it establishes a method for proper hand-application using the optional APA.

1.2

Terms/Definitions

mRDS:

modular Room Decontamination System

APA:

AeroClave Portable Applicator

Injection Phase

In this phase, the solution is aerosolized and applied evenly to the

treatment area. A typical injection phase can last anywhere from 5-30

minutes, depending on the size of the treatment area.

Dwell Phase:

Once an injection phase has completed, the treatment area is allowed to sit

for a minimum of 10 minutes in a dwell period. The dwell period gives the

aerosolized solution an opportunity to evenly distribute throughout the

treatment area, ensuring complete coverage on all surfaces.

Aeration Phase:

The aeration phase is the final stage when the treatment area is returned to

its normal habitable state. Do not re-enter the area until the air is clear

(minimum 20 minutes).

1.3

Equipment and Media



mRDS Unit



4 Liter AeroClave Solution Tank



AeroClave Approved Solution



APA



Touchscreen Controller

Содержание mRDS

















Результаты поиска

Содержание mRDS

Отзывы:

Бренды по названию

Популярные бренды

AeroClave mRDS, Руководство оператора

Результаты поиска

Содержание mRDS

Отзывы:

Бренды по названию

Популярные бренды