background image

4

1. 

REMOTE CONTROL

• 

Some  of the buttons of the re-

mote control are not used for the 

required air conditioner and are 

therefore not described in these in-

structions. Pressing of these keys will 

not affect the operation of the air 

conditioner.

• 

Check  there are no obstructions 

between the receiver and the re-

mote control.

• 

The  maximum distance between 

the IR receiver and the remote 

control is 8 metres, to ensure the 

signal is correctly received.

• 

Position the remote control at least 

1 metre away from TVs, radios, ste-

reos, etc. There may be some au-

dio and video interference.

• 

Do not drop or throw the remote 

control.

• 

Do not let liquids enter the remote 

control, and do not leave it in di-

rect sunlight or in hot places.

• 

When  the remote control sends a 

signal the symbol   appears on 

the display, the receiver of the in-

door unit emits a sound to confirm 

reception of the signal.

3

1

Index Function of the button:

1

Operating mode selection

2

Switches the unit on or off

3

Sets the fan speed

4

Sets the operation of the motorised air discharge fin (swing function)

5

Increases value (operating setpoint, timer, etc.)

6

Activates or deactivates the maximum fan speed (TURBO)

7

Activates or deactivates the SLEEP function (this function is applicable to the cooling and heating modes). Once 

activated this function will control the unit in order to maintain an ideal temperature (this temperature is automatically 

calculated and cannot be set)

8

Decreases value (operating setpoint, timer, etc.)

9

It displays in the indoor unit’s monitor the set temperature and the room air temperature (or the external air temperature)

10

Sets the time on the system clock

11

Activates or deactivates the WIFI card (available with accessory WIFIKIT/WIFIKIT10)

12

Activates or deactivates the display of information of the indoor unit

13

Activates, deactivates or changes the programmed switch on timer

14

Activates, deactivates or changes the programmed switch off timer

Keys available 

on remote control

6

4

9

7

10

14

2

5

8

11

12

13

Содержание WLRC10





















Отзывы: