AERMEC FK260 Скачать руководство пользователя страница 15

15

Aermec. 16.01. 5140901_01

11.  MAINTENANCE

11.1. 

GENERAL NOTES

 

• 

Disconnect the power supply before 

cleaning the unit

• 

Disconnect the power supply when the 

air conditioner is off

• 

Do not pour water directly to the unit 

may cause an electrical shock

• 

Clean the cabinet with a soft, dry cloth or 

a cloth slightly dampened with water or 

detergent (do not use solvents)

11.2. 

CLEANING THE FRONT PANEL

Clean the dirty side of the panel with a cloth 

dampened with warm water. Do not immerse 

the panel in water, so as not to damage the 

electrical circuit.

11.3. 

CLEANING THE AIR FILTER

the air filter behind the intake grille must be 

washed at least once every two weeks.

Remove the air filter (as shown in the 
following figures):

• 

Open the air intake panel

• 

Remove the screws on the left and right 

sides (shown in the figure)

• 

Apply light force to the structure to 

remove the filter.

How to clean the filter:

1. To remove the air intake grille, grasp the tab 

of the filter and pull to unhook it.

2. When the filter cleaning LED light appears, 

it is better to operate this way; once the filter 

is removed, dust it with a vacuum cleaner. 

3. rinse the filter under running water, always 

facing up so as to wash away excess dust not 

captured by the vacuum cleaner.

4. Only if after these steps the filter is still 

dirty, fill a tub with lukewarm water and some 

non-aggressive cleanser and soak it for a few 

minutes. Next, dry it with a cloth.

5. Otherwise, have a specialised technician 

clean the filter.

NOTES:
Do not clean with water that is too hot.
Do not dry the flame.
Do not operate the air conditioner without the 
air filter.
Do not use brushes or tools drives.

11.4. 

CHECK BEFORE STARTING

• 

Check to make sure that the inlet and 

outlet are not obstructed by objects on 

both units, external and internal.

• 

Check to make sure the earthing cable is 

connected and not damaged.

• 

Check to make sure the air filter is clean.

• 

Make sure that the remote control 

batteries are exhausted.

• 

Make sure that the unit are not damaged 

and that they are securely fastened.

11.5. 

MAINTENANCE AFTER USE

• 

Disconnect the power supply.

• 

Clean the filter and the internal grilles.

• 

Clean the unit and remove any 

obstructions from the battery.

 WARNING:

• 

This

 

equipment is not intended for use by persons (including children) with reduced physical or sensory impairment, or lack of experience and knowledge, 

unless an individual is responsible for the supervision and safety of people above provide them with the necessary instructions and supervision.

• 

The device should not be used by children as a game.

• 

Instruct the customer on how to use the system by showing him/her the accompanying manual.

• 

Make sure that the power user falls within the tolerance (+ / -10%).

Air filter

Screws 

Содержание FK260

























Отзывы: