WARNINGS CONCERNING INSTALLATION
The unit and its accessories must only be installed and
wired by professionals with the necessary technical
qualifications in installation, conversion, extension
and maintenance of the systems and who are trained
to perform operational and safety checks on these
systems. In this manual, these will generally be referred
to as “Personnel with specific technical skills”.
• Check that the power supply is disconnected before
carrying out any operations on the unit.
• Incorrect installation can result in water leaks,
electrocution or fires.
• Do not make any modifications to the unit! Do not
attempt to repair the unit alone, this is extremely
dangerous!
• Incorrect operations could cause electric shocks,
water leaks, fires etc.
• Contact your local dealer or After Sales Service: these
operations must only be carried out by “Personnel
with the specific technical skills”.
INSTALLATION AND TRANSPORT
• Transportation must be carried out by experts.
• For the installation, be sure to use only the
accessories and parts specified; failure to observe
this precaution may result in electric discharges,
electric dispersion or fires.
• To ensure good drainage, the condensate discharge
pipes must be correctly installed, following the
installation instructions. Adopt the most suitable
measures to avoid heat dispersion and the
consequent formation of condensate. Incorrect
installation of the pipes can result in water leaks,
wetting furniture and other items in the room.
NOISE
• Never place objects near the air outlet or the unit, as
this could reduce performance or increase the noise
level.
• If abnormal noises are heard during operation,
contact the local After Sales Service immediately.
INSTALLATION POSITION
• Install on a solid surface that can hold the weight of
the unit.
• Avoid places within the reach of children.
• Avoid exposure to other heat sources or to direct
sunlight.
• Install the unit away from TV, radio and other
electrical equipment.
• Do not install the unit in a location where it could be
affected by inflammable gas leaks. This could start a
fire. Install the unit in a location with minimal levels
of dust, fumes and humidity in the air.
• Do not install the unit near a laundry, bathroom,
shower or swimming pool.
WIRING
• Make sure the socket where the unit plug is to be
inserted complies with the laws and regulations in
force, and with this manual.
• Do not make joints on the power cable. Junctions
can cause overheating and/or fires. Do not repair a
damaged cable; replace it with a new one with the
same characteristics.
• The wiring diagrams are subject to a continuous
update. Therefore, it is mandatory to refer to those
on the machine.
• Make sure the unit is connected to a power socket
with the correct voltage and frequency. Using power
supplies with the incorrect voltage and frequency
could damage the unit and consequently risk
starting a fire. The voltage must be stable, without
major fluctuations.
• The installation must be carried out in compliance
with the national standards relating to electrical
systems, wiring and safety.
INSTALLATION
WARNING:
Gas pipes
: If there is an accidental electrical
discharge from the air conditioner, it could easily
cause a fire or even an explosion.
NOTES FOR UNIT INSTALLATION
17
