Aerial BlueDry AD810-P Series, Инструкция по эксплуатации

Страница: 21 / 32

MAINTENANCE AND SERVICE
Page 19 of 27
CAUTION
Dust hazard
During cleaning with compressed air dust is released into the
atmosphere.

Clean foam filter from outside and inside with a vacuum
cleaner, if necessary wash and dry it.

Clean device with compressed air only in an open
environment; wear protective mask and protective goggles.
CAUTION
Damage to the device

Cleaning agents can cause damage to surfaces. Use only mild
detergents.
Cleaning and inspection
The cleaning intervals depend largely on the operating conditions. Therefore check your
air dehumidifier regularly.
In order to guarantee trouble-free functioning of the air dehumidifier also in continuous
operation the air dehumidifier - in particular the air filter - must be checked and cleaned
at regular intervals.
Proceed as follows:
1. Check integrated hygrostat for functioning.
2. Switch air dehumidifier off.
3. Pull the power plug.
4. Remove filter holder.
5. Clean the air filter, if necessary replace it.
6. Visual inspection: Drain nozzle and hose connected possibly.
7. Insert new or cleaned filter. Use only original filters to guarantee proper functioning
of the air dehumidifier.
8. Insert filter holder.
9. Connect power cable.
10. Switch air dehumidifier on.
The air dehumidifier is ready for operation again and can be switched on via the On /
Off switch, if required.