Aerial BlueDry AD810-P Series, Инструкция по эксплуатации

Страница: 18 / 32

OPERATION AND OPERATOR CONTROL
Page 16 of 27
Operation with optional dewpoint kit (AERIAL Art. No. 5307-0025):
1. Use the on/off button on the operating panel to switch on the air dehumidifier with
the dewpoint kit fitted (see Connection of the optional dewpoint kit, page 13)
2. Use the arrow key to set the hygrostat to continuous operation
(Fig. 5, page 14).
If thawing is needed at the sensor, the air dehumidifier switches off: The display will
subsequently read "External off". As soon as thawing is required at the sensor, the air
dehumidifier will be switched on. In addition, the hygrostat can be set in such a way that
the dehumidifier is switched on after the room humidity has reached the value set, and
the sensor measures thawing.
For living space, climate conditions of 20 – 25 °C and 55 – 65% r. h. are
recommended. For quick building drying the hygrostat is set to
continuous operation.
For drying and keeping rooms with wood furnishing (e. g. parquet
flooring) or paintings, antiques etc. dry, a minimum moisture of 55 –
60% must be observed.
In case of doubt please contact your technical advisor.
Button Press briefly Press for 5 s Display
Lower the room
humidity in 1
percent steps Lower the room
humidity in 5
percent steps
Switching on the air
dehumidifier
Switching off the air
dehumidifier
(flashing)
Display power
consumption and
operating hours,
even if the unit has
been switched off
Increase the room
humidity in 1
percent steps Increase the room
humidity in 5
percent steps
Stop
Start 12345
45% 12345