aerauliqa QPX, Инструкция по эксплуатации

Страница: 34 / 36

34
4. Screw the anchor screws that fix the volute to the support structure.
5. Restore the return and aspiration tube from the appliance.
6. End of assembly.
OUT OF USE
LEVEL OF SPECIALIZATION REQUIRED
Specialization refers to any person who is 18 years of age or older, who is intelligent and has a normal physic, who has a copy of this chapter and whose employer can guarantee
his specific training.
PRECAUTIONS TO BE ADOPTED
WARNING: follow the indications in this chapter
WARNING: wear the appropriate accident prevention clothing .
BEHAVIOUR TO BE ADOPTED
1. Stop the appliance.
2. Cut off the electricity supply.
3. Disconnect the electric cables of the motor.
4. Spread a slight layer of oil on the metal parts to prevent oxidation.
5. Cover the appliance with a nylon covering.
UE DECLARATION OF
CONFORMITY/INCORPORATION
Manufacturer:
AERAULIQA SRL
Via Corsica, 10 – 25125 Brescia - ITALY
UE DECLARATION OF CONFORMITY
We herewith declare that the following range:
QPX centrifugal fans
on the basis of its design and construction as partly
completed machines brought onto the market, is designed
in compliance within relevant health and safety
requirements of the following Directives:
2014/35/UE - Low Voltage Directive (LVD)
2014/30/UE – Electromagnetic Compatibility (EMC)
2009/125/EC – Energy Related Products (ErP)
in the event that alterations are made to the machinery
without prior consent with the manufacturer, this
declaration becomes invalid.
This declaration is issued under the sole responsibility of
the manufacturer.
UE DECLARATION OF INCORPORATION
In accordance with the Machinery Directive 2006/42/EC.
We herewith declare that the following range:
QPX centrifugal fans
on the basis of its design and construction of partly
completed machines, is designed in compliance with the
Essential Health and Safety Requirements (EHSRs) of ANNEX
l, sections 1.1.2 (Safety integration), 1.1.5 (Handling), 1.4.1
(Protective devices), 1.5.1 (Electricity) of
EC Machinery
Directive 2006/42/EC .
The machinery is incomplete and must not be put into
service until such time as the machinery which is partly
complete is to be incorporated and has been assessed and
declared in conformity with the provisions of the Machinery
Directive 2006/42/EC.
We undertake to transmit, upon reasoned request by
appropriate national authorities, relevant information on
the partly completed machinery identified above.
Montichiari, 1/10/2016