AEQ
PHOENIX MERCURY
35
5. CONTROL TERMINAL OVER WEB BROWSER.
The Phoenix MERCURY includes a WebServer that enables you to execute numerous
functions remotely over the Ethernet interface included in the back panel of the unit; with the aid
of a standard web browser (compatibility is guaranteed with Internet Explorer running on
Microsoft Windows operating system).
5.1. Upgrading the equipment firmware.
The unit PHOENIX MERCURY is supplied from the factory with the latest firmware versions
available. However, firmware versions with new features may be released in the future, making
it necessary to upgrade the equipment to be able to make use of these new functionalities.
Because the upgrading process must be handled with caution, we recommend having it done
by an authorized distributor, or under the instructions of the AEQ Technical Assistance Service.
If questions or problems arise, consult the Technical Assistance Service via electronic mail
(
).
IMPORTANT NOTE:
If the
MICRO (CPU)
of the equipment is upgraded, part of its configuration
may be modified, specifically the part having to do with the MAC addresses, URIs, the SIP
Proxy Server Users and the associated Passwords. It is important to make a note of these
codec parameters before upgrading in order to reconfigure them afterwards.
The entire Phoenix MERCURY firmware versions upgrading process is done through the IP
interface of the unit, with the aid of a standard web browser (compatibility is guaranteed with
Internet Explorer running on Microsoft Windows operating system). By default, user and
password is “aeq”.
IMPORTANT NOTE:
the
recommended order for upgrading
is: MICRO (CPU) and DSP. The
process is iterative.
To upgrade the firmware, you must follow the steps detailed below:
1.
Check the IP address associated with the Ethernet interface, from “
CONFIG
“
Æ
“
Ethernet
“.
2.
Power down and up PHOENIX MERCURY
3.
Open the Internet Explorer web browser and, in the address bar, enter: HTTP://< IP
address obtained in point 1>. Press ENTER and the main screen will be displayed
Main screen detail