AEQ FORUM, Руководство пользователя

Страница: 53 / 139

AEQ Audio Over IP
Routing System
53
When Active Clock Status Monitoring is active, the button is
shown in green.
To switch it off, click the button again.
NOTE: Active monitoring does not affect passive monitoring.
Devices including an active supervision DANTE support module are:
-
"Brooklyn II" module, incorporated in several AEQ systems described in this manual.
-
"Ultimo" module, incorporated in several AEQ systems described in this manual.
- Dante PCIe cards.
- Dante-MY16-AUD cards.
If the device includes a "Brooklyn II" module, this is displayed in the "Product Type" in the
"Device Info" tab and also in the sections "Device Information" and "Dante Information" in the
"Status" tab within the corresponding "Device View" window. If the device includes an "Ultimo"
module, this is displayed in the section "Dante Information" in the "Status" tab within the
corresponding "Device View" window.
"Clock Status Monitor".
The Clock Status Monitor window includes two tabs: "Log"
and "History".
"Log".
The Clock Status log shows time-stamped clock status events for each device that has been
identified as unstable, or has lost or regained sync with the master clock.
The event types are:
Clock Sync Warning: Indicates that a clock
has been identified as unstable, and is at
risk of losing sync with the master clock.
Clock Sync Unlocked: Indicates that a
device has lost sync with the master clock.
This will result in the device being
automatically muted until it regains sync.
Clock Sync Locked: Indicates that a device
has regained sync with the master clock.
To delete all Clock Status log entries, click Clear. This will reset the Clock Status Monitor icon to
green.
NOTE: This will also clear all other event log entries (the Clock Status log is a filtered view of
the main event log).
"Dante Controller" will then resume monitoring (unless the Clock Status Monitoring button is
switched off).
To save the event log as an XML file, click Save.