AEQ FORUM Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 139

background image

AEQ

Audio Over IP

Routing System

31

Operating System Updates.

Ensure your PC has the latest Windows updates installed.

Firewall Configuration.

Firewall configuration for Windows Firewall is automatically handled during installation. "Dante
Controller" communicates over UDP over the following ports:

-

Dante Control and Monitoring: 8700-8705, 8800

If you are using a third-party firewall product, use the port information provided above to
configure it accordingly.

Monitor Requirements.

A display resolution of at least 1024 x 768, with a screen size of at least 19" is recommended for
"Dante Controller".

4.3. Installing "Dante Controller".

4.3.1. Downloading "Dante Controller".

"Dante Controller" is available for download from Audinate’s website. It’s also available in the
auto run disk furnished with AEQ equipment.

To download a copy of "Dante Controller":

1. Go to the Audinate website:

www.audinate.com

.

2.  Navigate to Products > Dante Controller.
3.  Under "Download", choose your operating system.
4.  Click the red download button.

This will take you to the appropriate "Dante Controller" release page for your operating system.
Click the link under "File downloads" to download the "Dante Controller" installer.

4.3.2. Installing "Dante Controller" on Windows.

Once you have downloaded the self-installing "Dante Controller" file, navigate to the directory
where you have downloaded it (e.g. Desktop).

To install "Dante Controller":

1.  Ensure you are logged on to your PC as an administrator.
2.  Navigate to and double-click the "Dante Controller" installer file.
3.  Read the license agreement. If you agree to the terms, select the 'I agree' checkbox and

click Install. If you do not agree to the terms, click Close.

4. Confirm / acknowledge any Windows security prompts that are displayed.

"Dante Controller" will then be installed. "Dante Controller" will be added to the start menu,
under "Audinate".

4.3.3. Updating "Dante Controller" on Windows.

"Dante Controller" can be updated directly from the application itself.

NOTE: Requires an active Internet connection.

Checking for Updates Manually: From the Help menu, select "Check for Updates".

Checking  for  Updates  Automatically:  "Dante  Controller"  can  also  check  for  updates
automatically.  If  an  update  becomes  available,  you  will  be  notified  via  a  pop-up  message.  To
activate  automatic  checking,  in  the  update  dialog,  select  the  option  to  check  for  updates
automatically.

«
...
29
30
31
32
33
...
»

Содержание FORUM












































































































































Отзывы:

Нет отзывов

Похожие инструкции для FORUM

Бренд: Yamaha Страницы: 277

Бренд: Valcom Страницы: 6

Бренд: Yamaha Страницы: 8

Бренд: Yamaha Страницы: 19

Бренд: STK Professional Audio Страницы: 28

Бренд: Canford Страницы: 9

Бренд: ARESA Страницы: 14

Бренд: IK Multimedia Страницы: 32

Бренд: audiophony Страницы: 24

Evolution Orange Underdrive

Бренд: Mad Professor Страницы: 2

Бренд: Voodoo Lab Страницы: 2

Matrix IRP-1650/LS4

Бренд: TeachLogic Страницы: 26

Бренд: Laney Страницы: 19

Бренд: Black & Decker Страницы: 12

Бренд: Black & Decker Страницы: 12

Бренд: Black & Decker Страницы: 16

Бренд: Black & Decker Страницы: 32

Бренд: Black & Decker Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды