AEMC OX 7102 III, Руководство пользователя

Страница: 202 / 226

Technical Specifications
X - 202 SCOPIX
Technical Specifications
( cont'd)
« Oscilloscope » Function
Trigger circuit
Characteristics
OX 7102
III
- OX 7104
III
OX 7202
III
- OX 7204
III
Trigger sources
CH1, CH2, CH3, CH4
(
OX 7x04
)
CH1, CH4
(
OX 7x02
)
Trigger mode Automatic
Triggered
Single shot
Auto Level 50 %
Bandwidth on
trigger
without bandwidth
limit
AC
DC
HF reject
BF reject
10 Hz to 100 MHz
0 Hz to 100 MHz
0 Hz to 10 kHz
10 kHz to 100 MHz
10 Hz to 200 MHz
0 Hz to 200 MHz
0 to 10 kHz
10 kHz to 200 MHz
With bandwidth limitation activated, the bandwidth is limited too.
Trigger slope Falling or rising edge
Trigger sensitivity
(noise rejection mode)
1,2 div. peak to peak
from DC to 40 MHz
1,2 div. peak to peak from DC to 50 MHz
2,4 div. peak to peak from
50 MHz to 200 MHz
Noise rejection ≈
± 1.5 div.
Trigger level
Variation range
± 10 div.
on edge Trigger source : CH1 (CH2) (CH3) CH4
on pulse width < T1 ; >T1 ;
∈
T1,T2] ;
∉
T1,T2]
with T1 and T2
∈
(
from 16 ns to 20 s)
Trigger after delay - of 48 ns to 20 s
- qualifier source : CH1 (CH2) (CH3) CH4
- trigger source : CH1 (CH2) (CH3) CH4
Trigger after counting - 3 to 16,384 events
- qualifier source : CH1 (CH2) (CH3) CH4
- counting source : CH1 (CH2) (CH3) CH4
- trigger source : qualifier or counting source
Trigger type
TV on CH1 only : - selection of line number and polarity,
with 525 lines (PAL) and 625 lines (SECAM),
- even or odd line field
- TV trigger sensitivity : > 1 div.
HOLDOFF adjustable from 64 ns to 15 sec.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412